{"id":8877,"date":"2024-04-08T14:22:44","date_gmt":"2024-04-08T12:22:44","guid":{"rendered":"https:\/\/www.geoinova.com\/autodesk\/?p=8877"},"modified":"2024-04-09T13:02:54","modified_gmt":"2024-04-09T11:02:54","slug":"revit-2025-sta-je-novo","status":"publish","type":"post","link":"https:\/\/www.geoinova.com\/autodesk\/revit-2025-sta-je-novo\/","title":{"rendered":"Revit 2025: \u0160ta je novo?"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Izasla je nova verzija jednog od napopularnijih Autodesk softvera, Revit 2025<\/b>. U daljem tekstu sazna\u0107ete koja su to klju\u010dna pobolj\u0161anja i dodaci koje nam donosi nova verzija<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Izvor: Autodesk\u00a0<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Sva pobolj\u0161anja podeljena su u 6 razli\u010ditih pravaca razvoja:<\/span>\u00a0<\/span><\/b><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Produktivnije projektovanje <\/b><\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Kreiranje zidova sa komandom \u201eAuto Join\u201c i \u201eLock\u201c<\/span><\/b>\u00a0–\u00a0<\/span>Automatizujte\u00a0modelovanje<\/strong>\u00a0i prikaz susednih zidova:<\/span>\u00a0<\/span><\/p>

  • Nove mogu\u0107nosti postavljanja zidova: komande \u201e<\/span>Auto Join\u201c<\/span><\/b>\u00a0i \u201e<\/span>Auto Join & Lock\u201c\u00a0<\/span><\/b>koje omogu\u0107avaju automatsko spajanje zidova sa susednim i njihovo zaklju\u010davanje (oba zida se pomeraju istovremeno)<\/span>\u00a0<\/span><\/li>
  • Dodate komande nisu primenljive za strukturne zidove, slo\u017eene i<\/span>\u00a0face-baced<\/span><\/i>\u00a0zidove i zid zavese<\/span>\u00a0<\/span><\/li>
  • Ograni\u010denja: nagnuti zidovi i zidovi sa su\u017eenjem \u0107e biti spojeni, ali se ne\u0107e zaklju\u010dati za susedne zidovi<\/span><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Ubrzajte reprezentaciju zidnih obloga:\u00a0<\/span>\u00a0<\/span><\/p>

    • Nove opcije za kontrolu zidne obloge uz koje je mogu\u0107e dozvoliti ili onemogu\u0107iti oblaganje na krajevima zidova direktno u pogledu osnove<\/span><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      \u201eArray\u201c od jednog elementa i prazan \u201earray\u201c<\/span><\/b>\u00a0–\u00a0<\/span>Vi\u0161e fleksibilnosti pri modelovanju familija sa komponentama u nizu:\u00a0<\/span>\u00a0<\/span><\/p>

      • Modelovanje elemenata u\u00a0<\/span>Array-ju<\/span><\/i>\u00a0koji se sastoji iz jednog elementa ili nula (0) elemenata; mogu\u0107e i u linearnoj i radijalnoj organizaciji<\/span><\/li><\/ul>
        \u00a0<\/div>

        Dizajn topografije \u2013 optimizacija alatke \u201cToposurface\u201d\u00a0<\/span><\/b>\u00a0<\/span><\/p>

        • Prilikom konverzije postoje\u0107ih \u201c<\/span>Toposurface\u201d<\/span>\u00a0povr\u0161ina u \u201c<\/span>Toposolid povr\u0161inu\u201d<\/span>, alatka \u0107e automatski prepoznati postoje\u0107e<\/span>\u00a0\u201c<\/span><\/i>Building Pads\u201d<\/span>\u00a0kao iskopane povr\u0161ine<\/span>\u00a0<\/span><\/li>
        • prilikom konverzije, stari\u00a0<\/span>Toposurfac<\/span>e<\/span><\/i>\u00a0sa povr\u0161inama za izgradnju \u0107e biti o\u010duvan pored novog\u00a0<\/span>Toposolida<\/span>\u00a0<\/span><\/li><\/ul>
          \u00a0<\/div>

          Nove opcije za kompleksniju geometriju<\/span><\/b>:<\/span><\/p>

          • Kreirajte\u00a0<\/span>Toposolid\u00a0<\/span><\/i>na osnovu bilo koje ne-vertikalne povr\u0161ine\u00a0<\/span>Mase<\/span><\/i>\u00a0\u2013 parametar \u201eRelated to Mass\u201c u karakteristikama Toposolid-a \u0107e ozna\u010davati da li je on napravljen iz\u00a0<\/span>Mase<\/span><\/i>\u00a0<\/span><\/li>
          • Ograni\u010denja: nije mogu\u0107e selektovati vi\u0161e lica iste Mase za kreaciju istog Toposolida<\/span>\u00a0<\/span><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t

            Vi\u0161i nivo kontrole iskopavanja u opciji \u201eToposolid\u201c-<\/span><\/b>\u00a0Koristite alatke\u00a0za formiranje plo\u010da, krovova ili topografskih elemenata kako biste uradili iskopavanje zapremine iz postoje\u0107e Toposolid povr\u0161ine<\/span><\/p>

            • Zapremina postoje\u0107eg Toposolid-a \u0107e biti uskla\u0111ena sa iskopanom zapreminom<\/span><\/li>
            • Alatka \u201cRemove Excavation\u201d poni\u0161tava isecanje i iskopavanje zapremine<\/span>\u00a0<\/span><\/li>
            • Funkcioni\u0161e i sa starim \u201cBuilding Pads\u201d elementima<\/span>\u00a0<\/span><\/li><\/ul>
              \u00a0<\/div>

              Efikasnije i ta\u010dnije kvantifikujte koli\u010dine zemlje uklonjene usecima ili iskopima uz pomo\u0107 dva nova parametra:\u00a0<\/span><\/p>

              • Individual Excavation Volume\u00a0<\/span>\u00a0<\/span><\/li>
              • Total Excavation Volume<\/span>\u00a0<\/span><\/li><\/ul>
                \u00a0<\/div>

                Parametri zapremina se mogu prikazati kroz tabele koli\u010dina.\u00a0<\/span><\/p>

                \u00a0<\/p>

                Se\u010denje \u201cToposolid-a\u201d uz pomo\u0107 alatke \u201cShaft\u201d-<\/span><\/b>\u00a0U prethodnim verzijama\u00a0je prilikom usecanja \u201eShaft\u201d prolazio kroz \u010ditav Toposolid, ignori\u0161u\u0107i donju stranicu; od verzije 2025, Toposolid \u0107e prepoznati donju stranicu Shaft-a kao limit za isecanje.<\/span>\u00a0<\/span><\/p>

                \u00a0<\/p>

                Modelovanje komponenti na iskopanoj povr\u0161ini –<\/span><\/b>\u00a0od verzije 2025, face-based komponente \u0107e prepoznavati povr\u0161ine ise\u010denog Toposolid-a kao\u00a0<\/span>host\u00a0<\/span><\/i>povr\u0161ine.<\/span>\u00a0<\/span><\/p>

                \u00a0<\/span><\/p>

                \u00a0<\/p>

                Unapre\u0111ena vizuelna reprezentacija \u201eToposolid-a\u201c:<\/span><\/b>\u00a0<\/span><\/p>

                • \u201cSmooth\u201d sen\u010denje mogu\u0107e u Shaded, Consistent Colors, Textures i Realistic vizelnim stilovima<\/span>\u00a0<\/span><\/li>
                • Povr\u0161ine ostaju glatko sen\u010dene i pri \u0161tampi ili eksportu<\/span>\u00a0<\/span><\/li><\/ul>

                  Prilikom izmena Toposolid-a, konturne linije ostaju vidljive.\u00a0<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

                  \n\t\t\t\t\t\t
                  \n\t\t\t\t\t
                  \n\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t\t
                  \n\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  Ve\u0107a preciznost u modelovanju povr\u0161inskih elemenata –\u00a0<\/span><\/b>Pri modifikovanju plo\u010da, krovova ili topografskih elemenata, mogu\u0107a je kontrola\u00a0<\/span>snap\u00a0<\/span><\/i>opcije\u00a0<\/span>za unutra\u0161nje ta\u010dke i ivice uz slede\u0107e opcije:<\/span>\u00a0<\/span><\/p>

                  • Snap po povr\u0161ini elementa; po X, Y, a kod topo povr\u0161ine i Z osi<\/span>\u00a0<\/span><\/li>
                  • Snap po apsolutnim koordinatama<\/span>\u00a0<\/span><\/li>
                  • XYZ Snap; vezati za ta\u010dku u 3D prostoru<\/span>\u00a0<\/span><\/li><\/ul>

                    \u00a0<\/span><\/p>

                    Dynamo za Revit 3.03. upgrade<\/span><\/b>\u00a0<\/span><\/p>

                    • Novi\u00a0<\/span>Toposolids nodes<\/span><\/i>\u00a0<\/span><\/li>
                    • Mogu\u0107nost pretrage\u00a0<\/span>Nodes<\/span><\/i>\u00a0po kategorijama<\/span>\u00a0<\/span><\/li>
                    • Novi\u00a0<\/span>Nodes<\/span><\/i>\u00a0u Dynamo bilbioteci : Gate node i Remember node<\/span>\u00a0<\/span><\/li><\/ul>

                      Parametarsko razdvajanje armature<\/span><\/b>\u00a0–\u00a0<\/span>Mogu\u0107nost podele armature na vi\u0161e \u0161ipki sa odre\u0111ivanjem du\u017eine preklopa armature i mesta podele armature<\/span>\u00a0<\/span><\/p>

                      \u00a0<\/p>

                      Vizuelan<\/span>\u00a0pregled<\/span>\u00a0armature\u00a0<\/span>koja<\/span>\u00a0zahteva<\/span>\u00a0korigovanje<\/span>\u00a0du\u017eine<\/span>\u00a0<\/span><\/strong>\u00a0<\/span><\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

                      \n\t\t\t\t\t\t
                      \n\t\t\t\t\t
                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t\t
                      \n\t\t\t
                      \n\t\t\t\t\t\t
                      \n\t\t\t\t
                      \n\t\t\t\t\t\t\t\t\t

                      Pobolj\u0161ana \u201e<\/span><\/b>Split\u201c<\/span><\/i><\/b>\u00a0funkcija za \u010deli\u010dne konstrukcije\u00a0<\/span><\/b>–\u00a0<\/span>Komanda \u201eSplit\u201c i \u201eSplit with gap\u201c je sada dostupna i za \u010deli\u010dne elemente<\/span>\u00a0<\/span><\/p>

                      Uklonjena \u201e<\/span><\/b>Options bar\u201c\u00a0<\/span><\/i><\/b>traka<\/span><\/b>\u00a0–\u00a0Za pojedine komande \u201e<\/span>Options bar\u201c\u00a0<\/span><\/i>traka je potpuno uklonjena i komande su preba\u010dene ili u paletu\u00a0<\/span>Properties\u00a0<\/span><\/i>ili u\u00a0<\/span>Ribbon<\/span><\/i>\u00a0traku<\/span><\/p>

                      \u00a0<\/p>

                      Mogu\u0107nost isklju\u010divanja parametra \u201eMark\u201c za MEP kategorije<\/span><\/b>\u00a0–\u00a0<\/span>Vrednosti parametra \u201eMark\u201c se ne\u0107e vi\u0161e automatski generisati prilikom kreiranja novih elemenata za slede\u0107e MEP kategorije:<\/span>\u00a0<\/span><\/p>

                      • MEP Ancillary Framing\u00a0<\/span>\u00a0<\/span><\/li>
                      • MEP Fabrication Ductwork Stiffeners\u00a0<\/span>\u00a0<\/span><\/li>
                      • Air Terminals\u00a0<\/span>\u00a0<\/span><\/li>
                      • Mechanical Equipment\u00a0<\/span>\u00a0<\/span><\/li>
                      • Duct Accessories\u00a0<\/span>\u00a0<\/span><\/li>
                      • Electrical Equipment\u00a0<\/span>\u00a0<\/span><\/li>
                      • Electrical Fixtures\u00a0<\/span>\u00a0<\/span><\/li>
                      • Mechanical Control Devices\u00a0<\/span>\u00a0<\/span><\/li>
                      • Lighting Fixtures\u00a0<\/span>\u00a0<\/span><\/li>
                      • Pipe Accessories\u00a0<\/span>\u00a0<\/span><\/li>
                      • Sprinklers\u00a0<\/span>\u00a0<\/span><\/li>
                      • Plumbing Fixtures\u00a0<\/span>\u00a0<\/span><\/li>
                      • Plumbing Equipment<\/span>\u00a0<\/span><\/li><\/ul>

                        \u00a0<\/p>

                        Provera integriteta modela (MEP Fabrication Parts)<\/span><\/b>\u00a0<\/span><\/p>

                        • Provera kvaliteta modela pre u\u010ditavanja konfiguracije za \u201eMEP Fabrication Parts\u201d. Ovako nestaje potreba za ponovnim u\u010ditavanjima konfiguracije, koje se javljalo ukoliko u modelu postoje diskonekcije.<\/span>\u00a0<\/span><\/li>
                        • Svi problemi se \u010duvaju u obliku upozorenja koja se mogu pregledati.<\/span>\u00a0<\/li><\/ul>

                          Monofazne komponente (Electrical Design)<\/span><\/b>\u00a0<\/span><\/p>

                          • Revit od sada podr\u017eava i monofazne komponente unutar trofaznih sistema, kao i raznovrsne monofazne i trofazne konfiguracije.<\/span>\u00a0<\/span><\/li>
                          • Parametri su tako\u0111e preimenovani radi jasnog identifikovanja njihovih svojstava.<\/span>\u00a0<\/span><\/li><\/ul>
                            \u00a0<\/div>

                            Fabrication Data Manager \u2013 izmena geometrije elemenata, pretrage elemenata i mogu\u0107nost dodeljivanja i u\u010ditavanja slika elementima<\/span><\/b>\u00a0<\/span><\/p>

                            • Promena geometrije elemenata u FDM-u (Fabrication Data Manager). Mogu\u0107nost dodavanja i brisanja tipova, a tako\u0111e i jednostavne izmene podataka na elementima kao \u0161to su pre\u010dnik, ugao i du\u017eina.<\/span>\u00a0<\/span><\/li>
                            • Preciznija pretraga elemenata u FDM-u. Filtriranje na osnovu podataka o elementima. Pretraga prema imenu elementa.<\/span>\u00a0<\/span><\/li>
                            • Jednostavno dodeljivanje slika elementima u FDM-u. Mogu\u0107nost generisanja slike od trenutnog 3D pogleda.<\/span>\u00a0<\/span><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                              \n\t\t\t\t\t\t
                              \n\t\t\t\t\t
                              \n\t\t\t
                              \n\t\t\t\t\t\t
                              \n\t\t\t\t
                              \n\t\t\t\t\t
                              Odr\u017eivost <\/b><\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                              \n\t\t\t\t\t\t
                              \n\t\t\t\t\t
                              \n\t\t\t
                              \n\t\t\t\t\t\t
                              \n\t\t\t\t
                              \n\t\t\t\t\t\t\t\t\t

                              Export gbXML \u2013 verzija 7.03<\/span><\/b>\u00a0–\u00a0<\/span>Revit sada podr\u017eava najnoviju verziju gbXML (v7.03)<\/span>\u00a0<\/span>Pro\u0161ireni opisi HVAC opreme uklju\u010duju\u0107i:<\/span>\u00a0<\/span><\/p>

                              • Zone Equipment<\/span>\u00a0<\/span><\/li>
                              • Air Systems<\/span>\u00a0<\/span><\/li>
                              • Hydronic Loops<\/span>\u00a0<\/span><\/li>
                              • HVAC sistemi: Air systems, Heat Exchangers, Fans, Chiller and Coil types<\/span>\u00a0<\/span><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                                \n\t\t\t\t\t\t
                                \n\t\t\t\t\t
                                \n\t\t\t
                                \n\t\t\t\t\t\t
                                \n\t\t\t\t
                                \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                                \n\t\t\t\t\t\t
                                \n\t\t\t\t\t
                                \n\t\t\t
                                \n\t\t\t\t\t\t
                                \n\t\t\t\t
                                \n\t\t\t\t\t\t\t\t\t

                                Forma Add-In za Revit \u2013 Update<\/span><\/b>\u00a0–\u00a0<\/span>Pristup Revit predlozima optimizovanim najnovijim setom analiza okoline iz softvera Forma<\/span>\u00a0<\/span><\/p>

                                • Embodied Carbon Tech Preview<\/span>\u00a0<\/span><\/li>
                                • Solar Analysis Beta<\/span>\u00a0<\/span><\/li>
                                • Rowhouse tool<\/span>\u00a0<\/span><\/li>
                                • Rhino extension<\/span>\u00a0<\/span><\/li><\/ul>
                                  \u00a0<\/div>

                                  Analiza ukupnog ugljenika za arhitekte:<\/span><\/b>\u00a0<\/span>Insight \u2013 Carbon Insights<\/span><\/b>\u00a0<\/span><\/p>

                                  • Potpuni uvid u uticaj operativnog i ugra\u0111enog ugljenika i kompromise izme\u0111u arhitektonskih re\u0161enja u Revitu. Dostupno u Revitu kao dodatak.<\/span>\u00a0<\/span><\/li>
                                  • Koristi EC3 baze podataka za konfigurisanje analize i prikazuje rezultate na grafikonima prema tipu konstrukcije, materijalu i koli\u010dini po jedinici povr\u0161ine.<\/span><\/li><\/ul>
                                    \u00a0<\/div>

                                    Analiza ukupnog ugljenika za arhitekte: Insight \u2013 Flexible Dashboards<\/b>\u00a0–\u00a0<\/span>Ima mogu\u0107nost kreiranja prilago\u0111enih, fleksibilnih i transparentnih prikaza rezultata analize, pomo\u0107u kojih mo\u017eete vr\u0161iti pore\u0111enja i analize kompromisa.<\/span>\u00a0<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t\t
                                    \n\t\t\t
                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t
                                    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t\t
                                    \n\t\t\t
                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t
                                    \n\t\t\t\t\t
                                    Analiza<\/b><\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t\t
                                    \n\t\t\t
                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t
                                    \n\t\t\t\t\t\t\t\t\t

                                    Godi\u0161nji raspored upotrebe objekta za analizu energetskih performansi<\/span><\/b>\u00a0–\u00a0<\/span>Raspored upotrebe objekta je od sada dostupan u okviru \u201eMEP Settings\u201c. Godi\u0161nji rasporedi sada mogu biti definisani za razli\u010dite radne uslove, dnevne rasporede i \u010dasovne vrednosti toplotnog optere\u0107enja.<\/span>\u00a0<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t\t
                                    \n\t\t\t
                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t
                                    \n\t\t\t\t\t
                                    Interoperabilnost <\/b><\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t\t
                                    \n\t\t\t
                                    \n\t\t\t\t\t\t
                                    \n\t\t\t\t
                                    \n\t\t\t\t\t\t\t\t\t

                                    Unapre\u0111en IFC Export Mapping Settings<\/span><\/b> <\/span><\/p>\n